Kart setup workshops for owner-drivers
For drivers and parents who run their own kart and want to understand what each adjustment does before they change it.
Request a session
What it covers
A kart has no suspension, so small changes to tyre pressure, seat position and axle setup have a big effect on how it handles. It's easy to chase a problem in circles.
In a workshop we start from a known baseline on your kart, then change one thing at a time and send you out to feel the difference. You keep a setup sheet as you go.
We don't sell parts, so the advice isn't tied to a catalogue. Often the answer is a pressure gauge and a notebook.
Included
- Baseline check of your kart
- Tyre pressures, hot and cold
- Gearing choice for the circuit
- Seat position and weight distribution
- Your own setup sheet to keep
Where we usually start
Three adjustments that cost little and change a lot.
Tyre pressures
A small change in pressure alters how quickly the tyre comes in and how it lasts. We measure before and after every run.
Gearing
The right sprocket lets the engine pull cleanly out of the slowest corner without running out of revs on the straight.
Seat position
The driver is the heaviest part of the kart. Moving the seat a little shifts the balance more than most parts you can buy.
How a typical session runs
Timings are a guide and vary with the circuit and the driver.
Track walk
We walk or talk through the circuit and agree reference points for braking and turning.
About 20 minBaseline laps
You drive a short run at your own pace so the coach can see where you are today.
About 10 minOne change at a time
Three or four short runs. Each has a single aim, with a debrief in between.
About 60 minDebrief and plan
We go through your times together and write down what to practise next.
About 20 min
Questions about kart setup workshops
Can't see yours? Add it to the request form and we'll answer it in our reply.
Which karts do you work with?
Most common club classes. Tell us your chassis and engine when you enquire so the right coach comes along.
Do you repair or service karts?
No. This is a coaching workshop, not a repair service. If we spot something worn or unsafe, we'll tell you so you can have it fixed.
Can a parent attend instead of the driver?
Yes. Many parents do the spannering, and the workshop works well with parent and driver together.
What do I need to bring?
Your kart in running order, your usual tools, a tyre pressure gauge, fuel and tyres with some life left in them.
Request a session
Tell us who's driving and roughly where you are. We'll come back with a circuit, dates and a fixed price.
Request sent
Thanks. We'll reply by email within two working days with a suggested circuit, dates and a fixed price.


